Gulf Stream copper-aluminium convector heaters with natural convection are hot-water heating appliances, that are installed along walls and windows of heated spaces. Gulf Stream convector heaters can be installed in spaces, where the water temperature in the heating system does not exceed 130°С and its excess pressure is below 1,6 mPa (16 kgf/cm²).
Gulf Stream convector heaters feature a corrosion-resistant heat exchange element that consists of a copper pipe and aluminium plates, as well as a galvanized steel powder-coated body. The convector heater is closed using a decorative grille, that is made of wood, aluminium or steel. Gulf Stream convectors are also equipped with an air exhaust valve. A foam rubber tape is installed in places where the decorative grille is in direct contact with the body of the appliance in order to prevent any friction and reduce noise.
Gulf Stream copper-aluminium in floor trench convector heaters are the perfect choice for spaces with panoramic glazing. They help prevent the glass from fogging and create an air curtain that stops the draughts.
Manufacturing convector heaters of a needed radius with corner elements is also possible. That allows the Gulf Stream series convector heaters to be installed in spaces with unusual architectural features. The connection element can be of a 90°, 120° or 135° angle (applies only for aluminium and wooden crosswise grilles).
The appliances can also be equipped with manual or automatic thermal control devices.
The convectors that are more than 3 meters long consist of two parts. Manufacturing convector heaters that are up to 4 meters long and consist of just one part is also possible as per the client’s request.
Gulf Stream convector heaters feature:
- A body that is made of galvanized steel sheet with aluminium edging;
- Heating element that consists of copper pipes and aluminium plates;
- Removable decorative grille (steel, wood or aluminium).
Stainless steel body adds 25% to the price of the appliance.
